Non Concussive Time Flow Pillar Tap

Product Detail

Press Button Non-Concussive Pillar Tap

• Press button time flow non concussive pillar tap
• Chrome plated
• 8 to 12 second run time
• 3 litre per minute aerator fitted for improved water flow
• Water saving
• Supplied as a single tap
• WRAS approved
• Brass backnut
• 2 years manufacturers warranty (warranty will not apply in cases of debris inside of the tap)
• It is advised that water filters or Y strainers are fitted to the supply pipework to non concussive taps to prevent water borne debris entering the cartridge (failure to do so will invalidate the warranty if debris has been allowed to enter the tap cartridge)
• Italian manufactured product

• Max Inlet Pressure 5 Bar
• Min Inlet Pressure 0.1 Bar
• Timed flow (standard) approx 10 seconds at 1 Bar
• 22mm tap hole required
• 1/2" standard connection

• 3 litres per minute

• From stock usually 1 to 2 working days

To see our full range of taps.

**All pictures shown are for illustration purpose only and may be subject to change without notice. Actual product may vary due to product enhancement.
All dimensions shown are for guidance only and may be subject to change or alteration without notice. All items manufactured or purchased separately from a third party to fit our products should be checked against the actual dimensions of the physical product before purchase. We will not be liable for third party costs and consequential loss associated with the items not fitting third party components.**